Bigpond Email Setup Using IMAP, POP, or SMTP

 Setting up your Bigpond email account with IMAP, POP, or SMTP allows you to access your emails through various email clients. Here’s how to configure your account:

  1. Choose Your Protocol:

○       IMAP (Recommended for flexibility): Keeps your emails on the server, allowing you to access and sync them across multiple devices.

○       POP (Good for single-device use): Downloads emails to your device and typically deletes them from the server unless configured otherwise.

  1. IMAP and POP Settings:

○       Incoming Mail Server (IMAP): imap.telstra.com

○       Incoming Mail Server (POP3): pop.telstra.com

○       Port: Use 993 for IMAP and 995 for POP3, with SSL required for both.

  1. SMTP Settings:

○       Outgoing Mail Server: smtp.telstra.com

○       Port: Use 465 with SSL or 587 with TLS/StartTLS.

○       Authentication Required: Yes, use your full email address and password.

  1. Configure Your Email Client:

○       Account Type: Select IMAP or POP based on your preference.

○       User Name: Enter your full email address.

○       Password: Use your Bigpond email password.

○       Server Authentication: Enabled (uses the same settings as your incoming mail server).

  1. Test Your Setup:

○       Send a test email to confirm that your settings work correctly. Check for both sending and receiving capabilities.

By following these settings, you can ensure your Bigpond email functions smoothly with your preferred email client, keeping your communications seamless across all your devices.

 More Info: https://www.bigpondonlineservice.com/blog/bigpond-customer-care-melbourne/

More Info: https://www.bigpondonlineservice.com/blog/bigpond-customer-support-australia/

Comments

Post a Comment

Popular posts from this blog

Steps to change bigpond email server settings in outlook?

Changing Bigpond email server settings in Outlook may be confusing to the users. Check out the general instruction to change Bigpond email server settings in Outlook: 1)      Firstly, open your computer and launch Microsoft Outlook App. 2)      Check in the top left corner and you will see “File” tab and click on it, then go to “Account settings” and select “Account Settings” from the menu option. 3)      In your “Account Setting” choose the email account that you want to change and Tap on “Change” button. 4)      In the “Change Account”, Incoming Mail Server (IMAP/POP) and Outgoing Mail Server (SMTP) will be visible. The server settings should be updated according to the setting that is provided by Bigpond. The incoming and outgoing server addresses, ports and encryption settings should be changed as necessary. Once the settings are updated, tap on “More Settings” to access additional settings. 5)      In additional settings, authentication, outgoing server settings, and adv
Read more

Bigpond Email Server Issues

  Your Bigpond email is not working correctly and one of the main reasons for this problem is server issue. But we can say that you don’t need to be hopeless because we have the perfect plan or troubleshooting Bigpond server issues which is explained here: ·        Please turn off your antivirus software and check to see if you are capable of sending and receiving mail. Some antivirus programs may mess with your email server settings and disrupt connection to the internet. ·        Always check to see if you have a reliable, fast, and robust connection to the internet. Issues may arise from an unreliable network. ·        In the email service setting up, turn on identification. Please make use of settings that are comparable to the incoming mail server or anything related to it. ·        Make sure the port address you provided is correct. Confirm the correct port information on the Bigpond official page. ·        Since configuration may change, please utilize the most recent
Read more

Forgot Bigpond Email Password

 Some of the users may suffer from dementia illness which results in forgetting their Bigpond email password. In this type of situation only the thing they can do is recover their Bigpond email password. Here are some of the information’s to recover the Bigpond email password: 1)   The first step is to open the browser and search for the Bigpond keyword.   Make sure to click on the official site of Bigpond. 2)   Tap on the “Forget Password” link which is found on the home page of the Bigpond site. 3)   On the screen the system will ask the users to enter the username or email id that is linked with the users Bigpond account. 4)   Enter the username and press the “Send” button. The system will send a link to recover the password. 5)   The system will ask the users to verify their identity. The system will ask to answer the security questions or provide the code that will be sent to users email id or phone. 6)   Once the verification procedure is completed successfully, the s
Read more